BoSL Board v0.5
Jump to navigation
Jump to search
2023 September 28
The BoSL board rev 0.5 arrived and its time to test how it works. Lets jump into it!
Straight out of the packet:
- Plugging in a battery the idel current 840 µA.
- Touching a screw driver to the F1 TEST pad lights up the test LED.
- When the WDT_EN jumper is closed the current jumps up to ~10 mA. This seems appropriate, if it enables the voltage on VPP.
From now on WDT_EN will be closed
- Voltage is good on 3V3 and VBAT. Measured (3.370V and 3.941V respectively).
Errors:
- WDT_EN is not the correct name for the jumper as the WDT is disabled when closed. It should be not WDT_EN
