Human Comfort Sensor

This project is an attempt in creating a low cost weather station sensors in order to measure the level of human comfort in that area. The sensors are compossed of wind speed sensors, black globe temperature sensors, temperature & humidity sensors

DC motor prototype

We tried to build a windspeed sensor from scratch, the first sensor are make using DC motor as a base. The idea is we will have the wind to turn the propeller that are attached to the dc motor and have the motor act as a generator. Turns out this method is not viable to be use for windspeed sensor application as the motor have a stall torque that are preventing it to turn when the windspeed is below 1 m/s.

Hall effect protoype

For the second prototype we tried to use a more popular method to measure windspeed which is to use a hall effect sensor and magnets. The sensor works by having the hall effect sensors to trigger when there's magnet on top of them and the hall effect sensor measure count the amount of time the magnet triggers the sensors.

Early prototype shows promise as this method could handle with low wind speed measurement as the only thing that could cause kept it from turning is the smoothness of the bearing. Sadly we don't go forward with this method as our users prefer to go with premade one as they have concern with the build quality of the 3D printed material. Although there are other 3D printer filament that could go against sunlight degradation, we need a long term testing to be sure as such we are not going to continued with this setup.