Assembling the Radar Sensor

From BoSL Wiki
Revision as of 23:57, 20 December 2021 by Stephen (talk | contribs) (→‎Firmware)
Jump to navigation Jump to search

This page will be dedicated to instructions of how to assemble the radar sensor.

Firmware

To load the firmware onto the radar module please follow the following instructions.

The below image is of the back of the radar PCB.

back side of radar PCB radar pinout

Testing

Cabling

Waterproofing

Retrieved from "https://www.bosl.com.au/wiki/index.php?title=Assembling_the_Radar_Sensor&oldid=21742"