BoSL mouting system

This page is dedicated to the BoSL sensor mounting System.

The BoSL sensor mounting system is used to have a universal interface from BoSL sensors for installation. It is designed to provide a secure and robust attachment of the sensor, while also being easy to remove and replace in the field.

Summary

The interface between the sensor and mount is a ball and socket joint. A threaded collet can be screwed over the ball and socket joint to lock it into position. This ball and socket joint can be 3D printed from the files below. Specifically the ball to be placed on the sensor is 15 mm in radius or 30 mm in diameter. An R-22 o-ring should be place in the collet to improve the gripping strength. Lubricant grease can also be placed between the socket and the collet (not on the ball) to allow the collet to be tightened easier.

==