WaterInsites

Water Insites Sensor Development and Testing Page

Tues 24 Mar, 2020. Was great to head to the lab at Monash and pickup my first batch of sensors and BoSL boards, and meet the team. Note team displaying great application of social distancing during these crazy times.

Team at Monash

Sat 28 Mar, 2020. Spent the weekend on (i) getting the PCB and battery secured inside the enclosure and (ii) setting up a suitable device to host all the gear for ultimate install on site. Mounting the PCB was actually very difficult as the fixing holes did not align, requiring a few trips to Jaycar, and then eventually mounting with a small timber piece in between. Casings were much simpler, although I am still yet to decide on names...

PCB in enclosure

Temp sensor (one sensor had silicon/epoxy over the sensor, but not this one)

Sensors in Test Bucket

Mon 30 Mar, 2020. Now to see how all the data is working. Will trial using Power BI to display the data collected by the sensors, once it has been cleaned and transformed. I still need to configure this to refresh automatically, but the draft webpages are provided in the link below.

There appears to be an issue with sensor 25178, which although working well initially, is now returning no pressure values (for air or water), and only intermittent temp values. It is strangely still recording battery and and EC, and I don't understand why the air pressure would not be recorded if this is attached to the BoSL board. (BoSL to advise).

02888; https://app.powerbi.com/view?r=eyJrIjoiYWQyNGVjMWQtYWFiYi00MjlmLWE4ZWEtNzc2YzU3NGQ3ZTEzIiwidCI6IjIxODcxNmEwLWFlYTctNDFlNi1iN2ExLWI1OTBmNTMyOTg3ZiJ9

25178; https://app.powerbi.com/view?r=eyJrIjoiY2MzYTg4ODMtOTA2Yy00ZGI1LWI0ODAtYmZkM2FjYmVlZWIzIiwidCI6IjIxODcxNmEwLWFlYTctNDFlNi1iN2ExLWI1OTBmNTMyOTg3ZiJ9

60103; https://app.powerbi.com/view?r=eyJrIjoiNmI4MmJlNjYtYjYyMS00NWE1LThkYjMtYmZkZmRmZGVjMDYwIiwidCI6IjIxODcxNmEwLWFlYTctNDFlNi1iN2ExLWI1OTBmNTMyOTg3ZiJ9

Database

You can download your data from the following website:

1. http://bosl.com.au/IoT/WaterInsites/databases/[[1]]

Code for BoSL Board

BoSL code uploaded to each board: 10 mins scan and logging interval; File:Jarrod.zip

Issue Centre

Jarrod, feel free to edit this section and place items in here that you need us to attend to. I have separated this into three sections, URGENT, ASAP and FUTURE.

URGENT

1. Dave to setup nice looking website for Jarrod 2. Dave to insert calibration curve into website calculations for the three sensors 3. Luke to place link for BoSL code on website ASAP

ASAP

1. ??? 2. ???

FUTURE

1. ??? 2. ???