Difference between revisions of "Training 041024"
| Line 3: | Line 3: | ||
To upload to the BoSL board please find the instructions below: | To upload to the BoSL board please find the instructions below: | ||
| − | + | =BOSL 0.5 SETUP= | |
Ensure that the JUPMER PIN is on the middle two - ON, not OFF or WDT. TIM at TINY to ensure all are ON. | Ensure that the JUPMER PIN is on the middle two - ON, not OFF or WDT. TIM at TINY to ensure all are ON. | ||
Revision as of 23:26, 3 October 2024
Today, Stephen went through all the steps required to make BoSL boards work awesomeomely!
To upload to the BoSL board please find the instructions below:
BOSL 0.5 SETUP
Ensure that the JUPMER PIN is on the middle two - ON, not OFF or WDT. TIM at TINY to ensure all are ON.
Connect the BoSL board to your computer using the USB port, plug in a battery to the BoSL board
Download the Arduino IDE (https://www.arduino.cc/en/software/OldSoftwareReleases)
Add the BoSL board package by following the instructions at https://monash-bosl.github.io/BoSL-IDE-Core/
https://monash-bosl.github.io/BoSL-IDE-Core/package_bosl.com.au_index.json from link above
FIRST go to preferences and paste in the above URL.
Click Tools > Board: > Board Manager
Type in BOSL and find the correct board manager - the 0.5 is in the BoSL Boards AVR B - INSTALL THIS.
Tools, boards, bosl, bosl 0.5.
Then go to file, examples and under utilities there should be utilities modem passthrough.
Upload and it should upload via the chosen COM PORT!
Pass through should work - turn off LINE ENDING such that it is NO LINE ENDING.
Try AT return - it should return OK.
