Difference between revisions of "Centrifuge"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
This section shows the BoSL Centrifuge. The BoSL centrifuge is a low-cost, open-source, freely available 3D-printed centrifuge for DNA and RNA extraction. The device can fit with any commercially available portable screwdriver, the 3D-printed components can extract twelve samples at a time. | This section shows the BoSL Centrifuge. The BoSL centrifuge is a low-cost, open-source, freely available 3D-printed centrifuge for DNA and RNA extraction. The device can fit with any commercially available portable screwdriver, the 3D-printed components can extract twelve samples at a time. | ||
| − | ======''' | + | == Design == |
| + | ==='''''Rotor '''''=== | ||
This 3d printed centrifuge is following the design of fixed-angle rotor. This 3d printed rotor with lid accommodates 12 samples and can be connected to the electric screwdriver by M12 bolts. | This 3d printed centrifuge is following the design of fixed-angle rotor. This 3d printed rotor with lid accommodates 12 samples and can be connected to the electric screwdriver by M12 bolts. | ||
| − | [[File:Centrifuge rotor.png|thumb|center| | + | [[File:Centrifuge rotor.png|thumb|center|400px|Centrifuge rotor]] |
| − | + | <gallery | |
| − | + | widths=370px | |
| − | + | heights=300px > | |
| + | File:Centrifuge.jpg | ||
| + | File:Centrifuge2.jpg | ||
| + | File:Centrifuge3.jpg | ||
| + | </gallery> | ||
Revision as of 00:34, 24 March 2023
This section shows the BoSL Centrifuge. The BoSL centrifuge is a low-cost, open-source, freely available 3D-printed centrifuge for DNA and RNA extraction. The device can fit with any commercially available portable screwdriver, the 3D-printed components can extract twelve samples at a time.
Design
Rotor
This 3d printed centrifuge is following the design of fixed-angle rotor. This 3d printed rotor with lid accommodates 12 samples and can be connected to the electric screwdriver by M12 bolts.
