Difference between revisions of "BoSL Board v0.3"

From BoSL Wiki
Jump to navigation Jump to search
(Created page with " <b>BOSL BOARD - THE ULTRA LOW POWERED IOT LOGGING DEVICE</b> This little beauty costs less than an Arduino and Sim5320a put together, yet it comes already assembled, runs on...")
 
(Added information about SIM card issue)
Line 3: Line 3:
  
 
This little beauty costs less than an Arduino and Sim5320a put together, yet it comes already assembled, runs on 4v, is ultra low power consuming (we removed all the overheads of the off the shelf arduinos) and can send data via the CAT-M1 or NB-IoT networks! We estimate that these things can log each minute for over 12months!
 
This little beauty costs less than an Arduino and Sim5320a put together, yet it comes already assembled, runs on 4v, is ultra low power consuming (we removed all the overheads of the off the shelf arduinos) and can send data via the CAT-M1 or NB-IoT networks! We estimate that these things can log each minute for over 12months!
 +
 +
 +
==== SIM7000 SIM CARD COMMUNITCATION ISSUE ====
 +
 +
There has been an issue where some of our boards aren't recognising the SIM cards, and so can't upload any data. To detect is if the issue is present the following AT command sequence can be sent.
 +
 +
{| class="wikitable"
 +
|-
 +
! Command !! Response
 +
|-
 +
| AT+CFUN=0 ||
 +
|-
 +
|          || +CPIN: NOT READY
 +
|-
 +
|          || OK
 +
|-
 +
| AT+CFUN=1||
 +
|-
 +
| || OK
 +
|-
 +
| || +CPIN = READY
 +
|-
 +
| || SIM READY
 +
|}

Revision as of 22:34, 20 November 2019

BOSL BOARD - THE ULTRA LOW POWERED IOT LOGGING DEVICE

This little beauty costs less than an Arduino and Sim5320a put together, yet it comes already assembled, runs on 4v, is ultra low power consuming (we removed all the overheads of the off the shelf arduinos) and can send data via the CAT-M1 or NB-IoT networks! We estimate that these things can log each minute for over 12months!


SIM7000 SIM CARD COMMUNITCATION ISSUE

There has been an issue where some of our boards aren't recognising the SIM cards, and so can't upload any data. To detect is if the issue is present the following AT command sequence can be sent.

Command Response
AT+CFUN=0
+CPIN: NOT READY
OK
AT+CFUN=1
OK
+CPIN = READY
SIM READY