Difference between revisions of "BoSL Board v0.5"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
* Touching a screw driver to the F1 TEST pad lights up the test LED. | * Touching a screw driver to the F1 TEST pad lights up the test LED. | ||
* When the WDT_EN jumper is closed the current jumps up to ~10 mA. This seems appropriate, if it enables the voltage on VPP. | * When the WDT_EN jumper is closed the current jumps up to ~10 mA. This seems appropriate, if it enables the voltage on VPP. | ||
| + | From now on WDT_EN will be closed | ||
| + | * Voltage is good on 3V3 and VBAT. Measured (3.370V and 3.941V respectively). | ||
Errors: | Errors: | ||
# WDT_EN is not the correct name for the jumper as the WDT is disabled when closed. It should be not WDT_EN | # WDT_EN is not the correct name for the jumper as the WDT is disabled when closed. It should be not WDT_EN | ||
Revision as of 10:51, 28 September 2023
2023 September 28
The BoSL board rev 0.5 arrived and its time to test how it works. Lets jump into it!
Straight out of the packet:
- Plugging in a battery the idel current 840 µA.
- Touching a screw driver to the F1 TEST pad lights up the test LED.
- When the WDT_EN jumper is closed the current jumps up to ~10 mA. This seems appropriate, if it enables the voltage on VPP.
From now on WDT_EN will be closed
- Voltage is good on 3V3 and VBAT. Measured (3.370V and 3.941V respectively).
Errors:
- WDT_EN is not the correct name for the jumper as the WDT is disabled when closed. It should be not WDT_EN
