Difference between revisions of "Centrifuge"
Jump to navigation
Jump to search
(→Design) |
(→Design) |
||
| Line 2: | Line 2: | ||
======'''Design'''====== | ======'''Design'''====== | ||
| − | This 3d printed centrifuge is following the design of | + | This 3d printed centrifuge is following the design of fixed-angle rotor. This 3d printed rotor with lid accommodates 12 samples and can be connected to the electric screwdriver by M12 bolts. |
| + | [[File:Centrifuge rotor.png|thumb|center|500px|Centrifuge rotor]] | ||
Revision as of 05:29, 23 March 2023
This section shows the BoSL Centrifuge. The BoSL centrifuge is a low-cost, open-source, freely available 3D-printed centrifuge for DNA and RNA extraction. The device can fit with any commercially available portable screwdriver, the 3D-printed components can extract twelve samples at a time.
Design
This 3d printed centrifuge is following the design of fixed-angle rotor. This 3d printed rotor with lid accommodates 12 samples and can be connected to the electric screwdriver by M12 bolts.
