Difference between revisions of "BoSL Board v0.4"
Jump to navigation
Jump to search
(Created page with "====This site provides a list of all the future improvements we would like to make for our BoSL baord. Let's separate this into immediate and future plans==== ==Immediate Pla...") |
|||
| Line 2: | Line 2: | ||
==Immediate Plans for our Next BoSL Board v0.4== | ==Immediate Plans for our Next BoSL Board v0.4== | ||
| + | 1. Real Time Clock module can be easily integrated on; SIM7000 has its own RTC but requires internet connection at the beginning (Stephen will look into whether we can use SIM7000's RTC, but will definitely put the separate RTC on the bosl board) | ||
| + | 2. GPS antenna (sure thing, we will modify all other designs based on our previous GPS version) | ||
| + | 3. Battery connection - we need to check the footprint first, but I got an idea is we put the battery connector on the bottom side of the board and seating a little bit away from the edge | ||
| + | 4. Pin 2 & Pin 3: we will free these 2 pins for attachinterrupt by changing the current softwareserial to other available digital pins | ||
| + | 5. Atmega chip - change to the smaller one which we used for sensors | ||
==Long term plans for our future BoSL boards== | ==Long term plans for our future BoSL boards== | ||
Revision as of 00:27, 16 April 2020
This site provides a list of all the future improvements we would like to make for our BoSL baord. Let's separate this into immediate and future plans
Immediate Plans for our Next BoSL Board v0.4
1. Real Time Clock module can be easily integrated on; SIM7000 has its own RTC but requires internet connection at the beginning (Stephen will look into whether we can use SIM7000's RTC, but will definitely put the separate RTC on the bosl board) 2. GPS antenna (sure thing, we will modify all other designs based on our previous GPS version) 3. Battery connection - we need to check the footprint first, but I got an idea is we put the battery connector on the bottom side of the board and seating a little bit away from the edge 4. Pin 2 & Pin 3: we will free these 2 pins for attachinterrupt by changing the current softwareserial to other available digital pins 5. Atmega chip - change to the smaller one which we used for sensors
